Apple 073-0562 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro ne Apple 073-0562. Apple 073-0562 User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 6
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
073-0562 Rev. E
Power Mac G4 / Macintosh Server G4
Video Card
Replacement Instructions
Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions
could result in damage to your equipment and may void your warranty.
Note:
Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Tools Required
Phillips screwdriver
Pliers
Opening the Computer
Warning: Always turn off your computer before opening it to avoid damaging its
internal components.
1. Place your computer on a clean, flat surface.
2. If you think your computer is in sleep, press the power button on the front of the
computer to wake it.
3. Shut down your computer by opening the Special menu and choosing Shut Down.
Then wait five minutes for the computer’s internal components to cool down.
4. If you attached a security cable through the computer’s lockable cover latch, remove
the cable.
5. Unplug all other cables from the computer except the power cord.
6. Touch the metal PCI access covers on the back of the computer.
(Figure 1A)
Important:
To avoid electrostatic discharge, always ground yourself by touching the
port access covers before you touch any parts or install any components inside the
computer. To avoid static electricity building back up in your body, do not walk
around the room until you have completed your installation and closed the computer.
7. Unplug the power cord.
Zobrazit stránku 0
1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - Video Card

073-0562 Rev. E Power Mac G4 / Macintosh Server G4 Video Card Replacement Instructions Be sure to follow the instructions in this sheet carefully

Strany 2 - Removing the Installed Card

Power Mac G4 Video Card - 2 8. Lift the latch on the right side access panel. (Figure 1B) 9. Gently lower the access panel until it lies flat. To av

Strany 3 - Closing the Computer

Power Mac G4 Video Card - 3 • Pull the card gently to see if it is properly connected. If it resists and stays in place, and if its gold connectors

Strany 4 - Power Mac G4 Video Card

Power Mac G4 Video Card - 4 12AB

Strany 5

Power Mac G4 Video Card - 5 34AGP slotABC

Strany 6

Power Mac G4 Video Card - 6 5CABB

Komentáře k této Příručce

Žádné komentáře