Apple Ethernet CS Twisted-Pair Card Instalační příručka Strana 34
- Strana / 65
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
2-24 Installing Asanté MacCon Cards
9 Place the motherboard (with the MacCon+ controller card
riding piggyback on it) back into the guides on the left
side of the chassis.
10 Reconnect the power supply and the disk drive cable on
the component side of the motherboard.
11 Plug the ribbon cable into the controller card’s receptacle.
Make sure the white dot on the ribbon cable aligns with
the white dot on the connector. (The blue wire is pin 1 on
both ends of the cable.)
12 Close the Macintosh SE:
— Place the Macintosh SE face down.
— Fit the aluminum shield over the external device con-
nectors and around the bottom and sides of the moth-
erboard.
— Fit the plastic case over the chassis and snap the case in-
to place. Screw the case shut.
Connecting the Macintosh to the Network
To connect the Macintosh to the Ethernet cable, perform the follow-
ing steps:
With 10BaseT cabling
1 Plug the RJ-45 connector on one end of the 10BaseT cable
into the RJ-45 jack on the card. The RJ-45 connector’s plastic
tab snaps locked into the jack.
2 Plug the other end of the cable directly into a hub or plug
it into a 10BaseT wall jack. A green LED (link integrity)
light indicates a good connection to the hub.
∆ Note: Asanté offers a full range of intelligent and non-in-
telligent 10BaseT-compliant hubs.
With thin Ethernet cabling
Caution
Check with your network administrator before you discon-
nect the Ethernet cable. Network users must be warned if
you are bringing down the network.
!
- MacCon Family 1
- Asanté MacCon 2
- Adapter Family 2
- Asking for assistance 5
- Tell us what you think 5
- Table of Contents 6
- List of Figures 8
- Introducing the 9
- Asanté MacCon Cards 9
- The Math Co-processor Option 10
- Chapter 2 11
- Observing the Safety Rules 12
- The MacCon NuBus Card 13
- Figure 2-2 14
- Figure 2-3 15
- Figure 2-7 18
- Installing a MacCon LC Card 19
- Figure 2-9 20
- Access panel 21
- Thumbscrews 21
- Figure 2-11 22
- + 30iET MacCon+ 30iE 23
- ●24 PDQ si 24
- Figure 2-13 27
- Caution 28
- Figure 2-15 29
- Caution 32
- 5 Take out the motherboard: 33
- With 10BaseT cabling 34
- Help but 35
- Installation Procedures 36
- 2 Select EtherTalk 38
- Chooser from the Apple menu 39
- Asanté SNMP MacAgent 40
- Installing SNMP MacAgent 42
- Configuring MacTCP 43
- Configuring SNMP MacAgent 44
- Asanté SNMP MacAgent 3-7 46
- Figure 3-4 46
- 3-8 Asanté SNMP MacAgent 47
- Figure 3-5 47
- Diagnostic Software 48
- Ping-Pong Test Passed 50
- Running the Loopback test 51
- If a test fails 53
- Troubleshooting 56
- Running TroubleShooter 57
- Other Tips 57
- Troubleshooting 5-3 58
- Technical Specifications 60
- Ethernet Address 61
- Ethernet Specifications 62
- Connector Pin-outs 63
- RJ-45 Connector 65
Související produkty a manuály pro Barebones pro PC / pracovní stanice Apple Ethernet CS Twisted-Pair Card
Barebones pro PC / pracovní stanice Apple Macintosh Performa 6100 series Uživatelská příručka
(196 stránky)
(196 stránky)
Barebones pro PC / pracovní stanice Apple User^aEURTMs Guide NMB-003 Uživatelská příručka
(136 stránky)
(136 stránky)
Satel CA-5 P Quick User Guide Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Sicherheit Satel CA-5 P Quick User Guide.
Wir stellen 1 PDF-Handbücher Satel CA-5 P Quick User Guide zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentáře k této Příručce