Apple Xserve G5 Uživatelská příručka

Xserve G5 PCI Hardware RAID CardUser’s Guide Includes instructions for installingand configuring your card

10 Chapter 1 Installing Your Xserve G5 PCI Hardware RAID Card 8 Locate the battery (at the lower-right side of the card) and carefully plug the

Chapter 1 Installing Your Xserve G5 PCI Hardware RAID Card 11 • Don't force the card. If you meet a lot of resistance, pull the card out.

12 Chapter 1 Installing Your Xserve G5 PCI Hardware RAID Card 11 Remove the card from the PCI slot and tape the black mylar insulation sheet to

Chapter 1 Installing Your Xserve G5 PCI Hardware RAID Card 13 12 Re-install the card in the bottom PCI slot with the standoff in place. Remove

14 Chapter 1 Installing Your Xserve G5 PCI Hardware RAID Card 14 Remove the PCI fan by prying off its cover and lifting the fan and cover up ab

Chapter 1 Installing Your Xserve G5 PCI Hardware RAID Card 15 17 Locate the SATA cables provided with the PCI Hardware RAID Card kit. Check the

16 Chapter 1 Installing Your Xserve G5 PCI Hardware RAID Card 19 Replace the PCI fan and cover by connecting the fan's cable, lining up th

2 17 2 Configuring the Xserve G5PCI Hardware RAID Card Configuring your PCI Hardware RAID Card and RAID volume is a four-step process. You mus

18 Chapter 2 Configuring the Xserve G5 PCI Hardware RAID Card 4 Press and hold down the system identifier button for at least 2 seconds until a

Chapter 2 Configuring the Xserve G5 PCI Hardware RAID Card 19 Using Megaraid to Create a RAID VolumeCreating a Single RAID VolumeDepending on the n

 Apple Computer, Inc.© 2004 Apple computer, Inc. All rights reserved.Under the copyright laws, this manual may not be copied, in whole or in part

20 Chapter 2 Configuring the Xserve G5 PCI Hardware RAID Card mTo create a RAID 0 striped volume across the first two drives, with stripe size of 6

3 213 Command ReferenceThis chapter describes the megaraid commands you can use to work with your PCI Hardware RAID Card.The commands are listed

22 Chapter 3 Command Reference Megaraid Commands Functionsmegaraid -alarm -on | -off | -silenceTurns the alarm on, off, or to silence. When the ala

Chapter 3 Command Reference 23 megaraid -showadapter [-log file]Displays information about the adapter including product identification, battery st

4 254 Xserve G5 PCI Hardware RAID Card Specifications• PCI 2.2 compliant – 64-bit, 33 or 66 MHz PCI• Four (three available for use) internal 150

27Communications Regulation InformationClass B Radio and Television Interference Statement This computer equipment generates, uses, and can radia

28 Battery DisposalDispose of batteries according to your local environment laws and guidelines. Do not puncture or incinerate the battery.Nederl

3 3 Contents Preface 5 About the Xserve G5 PCI Hardware RAID CardChapter 1 7 Installing Your Xserve G5 PCI Hardware RAID Card7 Before You Inst

www.apple.comPrinted in XXXXX

5 Preface About the Xserve G5 PCI Hardware RAID Card The Xserve G5 PCI Hardware RAID Card offers enhanced reliability and performance for data

6 Preface About the Xserve G5 PCI Hardware RAID Card The PCI Hardware RAID Card is designed to be installed in the Xserve G5 only. It cannot be

1 7 1 Installing Your Xserve G5 PCI Hardware RAID Card This chapter provides instructions for installing the RAID card in your Xserve G5.Befor

8 Chapter 1 Installing Your Xserve G5 PCI Hardware RAID Card 2 Move to the front of the server and open it to its full length. Remove the serve

Chapter 1 Installing Your Xserve G5 PCI Hardware RAID Card 9 5 To prepare to install the card, do one of the following: • If you need to remove