Apple eMac ATI Graphics (Memory Replacement) Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Počítače Apple eMac ATI Graphics (Memory Replacement). Apple eMac ATI Graphics (Memory Replacement) User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 8
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
eMac (ATI Graphics) and eMac (USB 2.0)
Memory
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note:
Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Tools Required
#2 Phillips screwdriver
Opening the User Access Door
1. Save all open documents and quit all open applications.
2. Turn the computer off by choosing Shut Down from the Special menu (if using Mac OS
9), or choose Shut Down from the Apple menu (if using OS X).
3. Unplug all cables, except the power cord, from the computer. (Figure 1)
Warning:
If the internal modem is connected to a telephone line, disconnect the
telephone line from the internal modem port before you open the user access door.
This prevents electric shock.
Figure 1
Zobrazit stránku 0
1 2 3 4 5 6 7 8

Shrnutí obsahu

Strany 1 - Replacement Instructions

 eMac (ATI Graphics) and eMac (USB 2.0) MemoryReplacement Instructions Follow the instructions in this sheet carefully. Failure to follow these in

Strany 2

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 2 4. Place a soft towel or cloth on the desk or surface. Position the computer so the screen is faci

Strany 3

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 3 6. Important: To avoid electrostatic discharge, always ground yourself by touching metal before

Strany 4 - Removing the Installed Memory

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 4 Removing the Installed Memory 1. Push down the ejectors on the slot of the memory module you want

Strany 5 - Procedure

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 5 Installing Memory RAM Expansion Module Specifications The RAM expansion modules used in the eMac an

Strany 6

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 6 3. Align the replacement memory module in the memory slot, apply pressure evenly to both top corne

Strany 7 - Closing the User Access Door

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 7 Closing the User Access Door 1. Replace the screw on the user access panel. (Figure 7) Figure 7 2.

Strany 8

eMac (ATI Graphics) and eMac (USB 2.0) Memory - 8  Apple Computer, Inc.© 2004 Apple Computer, Inc. All rights reserved.Under the copyright laws, t

Komentáře k této Příručce

Žádné komentáře