Apple PC Serial and Parallel Card Uživatelský manuál stáhnout pdf (Strana 22)

Inserting the PC Serial and Parallel Card

11 Insert the card into the PCI slot so that the card fence faces the port access opening.

IMPORTANT

Always hold the card by its edges. Don’t touch any of the

components on the card.

12 Supporting the adapter fence with one hand, push the card until it snaps into place.

Press the card in firmly. If you meet resistance, pull the card out and try again.

To see if the card is connected properly, make sure the card’s metal fence is

flush with the side of the port access cover.

m Don’t rock the card from side to side; press it straight into the slot. Rocking

the card can damage the PCI slot.

m Don’t force the card. If you meet a lot of resistance, pull the card out and

try again.

Adapter fence

Reinstall the screw to

secure the card in place.

Top PCI slot Card fence

Chapter 2

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 83 84

Žádné komentáře

Apple PC Serial and Parallel Card Uživatelský manuál Strana 22